Installation Instruction of CNC Drilling Machine for Boiler Header

JXZ CNC drilling machine for boiler header under installation:

Supertime customized design and manufactured CNC drilling machine for boiler header, 23m long in total, after successful inspection and delivery to Chinese users, is now under installation, takes about 7 days.

Main highlights:

BT50 precision spindle, SIEMENS 840D CNC system, high speed drilling, milling functions, vertical drilling with automatic positioning and error compensation systems. Is an ideal equipment for boiler header and tube processing.

Such a huge equipment, surely will take lots of time for installation and commissioning. When you grasp the following points, installation will become easy time and labor-saving!

Installation instruction:

1: BASE LEVEL ADJUSTMENT: Put the two bases on the foundation, and leave 5mm gap in the middle. Use the level meter to observe the relative height of the 8 angles of the two bases. The highest is the reference, the rest is adjusted to the same height, and then use the bar level meter to slightly adjust level, pay attention to the positioning pin of the connecting plate to be inserted easily.

2: ADJUST SPINDLE AND THREE JAW CHUCK CENTER: Axis 30mm in diameter, 200mm long will be clamped by three jaw chuck, install toolbar to spindle, then push the axis, calculate how thick does Y axis need of the gasket, in order to make center correct of spindle and three jaw chuck. Then put the gasket in Y axis direction.

3. ADJUST THE V TYPE SUPPORT MIDDLE AND EQUAL HEIGHT: Middle part adjustment through spindle, install a taper 45 degrees to the spindle, lower the spindle, measure distance between lower cone and V type support surface, make the two parts consistent, in this way, V type support is in the middle. Equal height adjustment by installing the axis to V type support, suck up dial indicator on spindle, lower spindle and charge axis, record the value and Z axis coordinate value, and adjust well V type support based on these 2 values.

More info: 
Jinan Supertime Technology Co.,Ltd
CNC machine design & manufacture specialist 

www.icncmachines.com

kevin@jntime.com  +86 15863141078